scratchbuilding a Flottentorpedoboot Typ 39 in scale 1/35
- himmelhund
- Member
- Posts: 124
- Joined: 31 Oct 2005, 14:39
- Location: Mol Vlaanderen
scratchbuilding a Flottentorpedoboot Typ 39 in scale 1/35
Hi all ,
I have seen so many wonderfull modelling projects on this forum , from all around the world , so I thought why not sharing my build with you all.
overall starboard view of my build
Aft part of the hull , with rudder and prop shaft , figure is by Hecker/Görös (54mm high)
again aft view from above , notice the stern typical for this type of boat.
The ' Schlingerkiel ' or in english the bilge keel.
the sonar .
The front part of the boat , notice the typical knick in the front part.
enjoy , more photos to come,
regards,
Himmelhund
I have seen so many wonderfull modelling projects on this forum , from all around the world , so I thought why not sharing my build with you all.
overall starboard view of my build
Aft part of the hull , with rudder and prop shaft , figure is by Hecker/Görös (54mm high)
again aft view from above , notice the stern typical for this type of boat.
The ' Schlingerkiel ' or in english the bilge keel.
the sonar .
The front part of the boat , notice the typical knick in the front part.
enjoy , more photos to come,
regards,
Himmelhund
- reichpilot
- Member
- Posts: 1216
- Joined: 01 Jul 2003, 04:15
- Location: U.S.A.
- Tom Houlihan
- Member
- Posts: 3985
- Joined: 06 Oct 2002, 06:53
- Location: MI, USA
- Contact:
-
- Member
- Posts: 743
- Joined: 01 Jan 2003, 23:31
- Location: Norway
- himmelhund
- Member
- Posts: 124
- Joined: 31 Oct 2005, 14:39
- Location: Mol Vlaanderen
hi all,
The hull is completely primed , and the comouflage patern has been drawn on the hull.
Above the drawing how he should look like when painted. (starboard side)
the port side of the boat , colours to be used :Mittel Grau ; Schwarz Grau ; Weiss ; Hell Grau ; Ultramarine Blau ; Kaiser Rot , and yellow for the live rafts/floats.
the aft starboard side.
front port side.
colourphotos for the end of this week.
enjoy,
Himmelhund
The hull is completely primed , and the comouflage patern has been drawn on the hull.
Above the drawing how he should look like when painted. (starboard side)
the port side of the boat , colours to be used :Mittel Grau ; Schwarz Grau ; Weiss ; Hell Grau ; Ultramarine Blau ; Kaiser Rot , and yellow for the live rafts/floats.
the aft starboard side.
front port side.
colourphotos for the end of this week.
enjoy,
Himmelhund
- himmelhund
- Member
- Posts: 124
- Joined: 31 Oct 2005, 14:39
- Location: Mol Vlaanderen
Hi Xavier,
90% of the build is scratch , you will see which items are from manufacturers , i.e. the 20mm flak is from Tamiya. The 10.5cm guns will be scratch build to , I shall take the Hecker/Görös 10,5 cm gun (1/32) as a model to build my own. The boat is about 3 meters long , or almost 10 feet , max width is 28 cm or +11inch , the hull is completly vacuum-formed ( in 4 seperate parts) the weight of the hull until now is about 4 kg or 8.8 lbs. This model is not RC but will be a static model into a large diorama with an other boat , probably a minesweeper type 35 ( also scratch build). Both these ships will be in some harbour diorama , with cranes , trains , wagons , mines , figures....etc.
Stay tuned,
regards,
Himmelhund
90% of the build is scratch , you will see which items are from manufacturers , i.e. the 20mm flak is from Tamiya. The 10.5cm guns will be scratch build to , I shall take the Hecker/Görös 10,5 cm gun (1/32) as a model to build my own. The boat is about 3 meters long , or almost 10 feet , max width is 28 cm or +11inch , the hull is completly vacuum-formed ( in 4 seperate parts) the weight of the hull until now is about 4 kg or 8.8 lbs. This model is not RC but will be a static model into a large diorama with an other boat , probably a minesweeper type 35 ( also scratch build). Both these ships will be in some harbour diorama , with cranes , trains , wagons , mines , figures....etc.
Stay tuned,
regards,
Himmelhund
- himmelhund
- Member
- Posts: 124
- Joined: 31 Oct 2005, 14:39
- Location: Mol Vlaanderen
-
- Member
- Posts: 318
- Joined: 23 Mar 2004, 11:22
- Location: Purdue, IN
- Contact:
- reichpilot
- Member
- Posts: 1216
- Joined: 01 Jul 2003, 04:15
- Location: U.S.A.