Maschinenstände regional types
Re: Maschinenstände regional types
remember we found the 8eck Bunker at D1 also as Beo...
greetz
Alex
greetz
Alex
- dirk Peeters
- Member
- Posts: 6568
- Joined: 24 May 2011, 21:18
- Location: Heist op den Berg Belgium
Re: Maschinenstände regional types
???? i don t understand Alex
- dirk Peeters
- Member
- Posts: 6568
- Joined: 24 May 2011, 21:18
- Location: Heist op den Berg Belgium
Re: Maschinenstände regional types
yes i know
this type must have several purpose
Dirk
this type must have several purpose
Dirk
Re: Maschinenstände regional types
found this in one of the 8eck Bunker...
anyone an idea what it means?
Alex
anyone an idea what it means?
Alex
- Bunkerfreak
- Member
- Posts: 1300
- Joined: 16 Sep 2012, 19:45
- Location: Antwerpen
Re: Maschinenstände regional types
I'm always told this have to do with the "telephone-number" of that bunker...
Re: Maschinenstände regional types
hi alex,
only see the box tèlèphon on the "parc du marquentaire". in the other machinstand never see the fixation box.
regards
only see the box tèlèphon on the "parc du marquentaire". in the other machinstand never see the fixation box.
regards
- Bunkerfreak
- Member
- Posts: 1300
- Joined: 16 Sep 2012, 19:45
- Location: Antwerpen
Re: Maschinenstände regional types
On the picture of alex i see four attachement points, is this for the KeV- telephone switchbox then?
Can anyone explain what the purpose is of those numbers in combination with letters in a "telephone number"? In AOK 15 we find them also very often, but i never understood why there are letters in an telephone number.
Can anyone explain what the purpose is of those numbers in combination with letters in a "telephone number"? In AOK 15 we find them also very often, but i never understood why there are letters in an telephone number.
- dirk Peeters
- Member
- Posts: 6568
- Joined: 24 May 2011, 21:18
- Location: Heist op den Berg Belgium
- dirk Peeters
- Member
- Posts: 6568
- Joined: 24 May 2011, 21:18
- Location: Heist op den Berg Belgium
Re: Maschinenstände regional types
the machinestand from Hanstholm I has a little brother in StP 33 Lyngby
are there more of this type in Danmark ?
are there more of this type in Danmark ?
Re: Maschinenstände regional types
Dear Dirk and team,dirk Peeters wrote:a new plan from the one at Hanstholm I bttr
Since Hanstholm is still one of my 3D projects I want to make a 3D of this "Machineunterstand".
But I do miss some dimensions. Do you have them for me ?
It seems that you still have a "fobie" for heights If you travel far and work hard why not measure heights of ceiling and doorways ?
Please measure heights of doorways, ceilings, "Sockels" but also depths of pits and gulleys.
Thanks,
Wim
www.petromax.nl
3D : http://www.petromax.nl/Hanstholm.html
http://www.petromax.nl/DeBeer.html
Wim
www.petromax.nl
3D : http://www.petromax.nl/Hanstholm.html
http://www.petromax.nl/DeBeer.html
- dirk Peeters
- Member
- Posts: 6568
- Joined: 24 May 2011, 21:18
- Location: Heist op den Berg Belgium
Re: Maschinenstände regional types
Wim
i don t like to carry a spade with me all day ... so heights , no thanks
many bunkers are filled up with sand some i have even to dig under a door for entering (Agger Tange the V 174 ) so covered up with sand
but i can give you
A is 2 m 20
B 1m 23
forget the write them down
i don t like to carry a spade with me all day ... so heights , no thanks
many bunkers are filled up with sand some i have even to dig under a door for entering (Agger Tange the V 174 ) so covered up with sand
but i can give you
A is 2 m 20
B 1m 23
forget the write them down
- dirk Peeters
- Member
- Posts: 6568
- Joined: 24 May 2011, 21:18
- Location: Heist op den Berg Belgium
Re: Maschinenstände regional types
i worked in the field from 6 uh 15 just till 19h each day for making the max of my trips in denmark
now it s up to others to help you with heights
sorry
- dirk Peeters
- Member
- Posts: 6568
- Joined: 24 May 2011, 21:18
- Location: Heist op den Berg Belgium
Re: Maschinenstände regional types
i m satisfied with a overview plan
Re: Maschinenstände regional types
Dirk,
I see. That is a challenge.
But you can measure the vent openings
Just kidding.
You all do good work. And don't take my questions or remarks as a complain.
I see. That is a challenge.
But you can measure the vent openings
Just kidding.
You all do good work. And don't take my questions or remarks as a complain.
Thanks,
Wim
www.petromax.nl
3D : http://www.petromax.nl/Hanstholm.html
http://www.petromax.nl/DeBeer.html
Wim
www.petromax.nl
3D : http://www.petromax.nl/Hanstholm.html
http://www.petromax.nl/DeBeer.html