42cm Marinekanone L/16, Gamma-Gerät 3D printed

Discussions on historical model building of all eras.
EPOCH3
Member
Posts: 641
Joined: 30 Jul 2006, 23:22
Location: RI USA

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#16

Post by EPOCH3 » 15 Nov 2020, 15:57

A bit more complete with primer -
Attachments
gamma 1b.jpg
gamma 1.jpg
gamma 1a.jpg

User avatar
Frech
Forum Staff
Posts: 2349
Joined: 08 Oct 2005, 09:27
Location: Austria
Contact:

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#17

Post by Frech » 15 Nov 2020, 18:21

I want to contribute my congratulations for that fine and detailed work. It´s fascinating what you can do with 3D-printing!

Thumbs up!

Christian


EPOCH3
Member
Posts: 641
Joined: 30 Jul 2006, 23:22
Location: RI USA

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#18

Post by EPOCH3 » 15 Nov 2020, 20:30

Thanks much - in some ways its a very good time for the hobby - regards

EPOCH3
Member
Posts: 641
Joined: 30 Jul 2006, 23:22
Location: RI USA

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#19

Post by EPOCH3 » 25 Nov 2020, 15:04

Last little bits of the work crane now complete -
Attachments
aa.jpg
aaa.jpg

MLW
Member
Posts: 644
Joined: 12 Jan 2008, 05:35
Location: Maryland
Contact:

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#20

Post by MLW » 26 Nov 2020, 16:36

Very, very nice. Your research is impeccable.

EPOCH3
Member
Posts: 641
Joined: 30 Jul 2006, 23:22
Location: RI USA

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#21

Post by EPOCH3 » 03 Dec 2020, 16:38

prototyping the turret modification used with Gamma
Attachments
Gamma w turret 2a.jpg

slug
Member
Posts: 8
Joined: 29 Jun 2020, 00:23
Location: UK

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#22

Post by slug » 19 Jun 2021, 12:39

Just ordered the Gamma. Will this new modification be released later as an add on? Hate to start mine only to find I should have waited. Thanks

EPOCH3
Member
Posts: 641
Joined: 30 Jul 2006, 23:22
Location: RI USA

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#23

Post by EPOCH3 » 19 Jun 2021, 14:49

Hi - this was just a mod I did as a prototype to see if I could figure out
how it was added and what it would have looked like so sorry its not a
commercially available item. Its neat but it hides so much detail.
I hope you enjoy the kit - I think its pretty awesome :)

slug
Member
Posts: 8
Joined: 29 Jun 2020, 00:23
Location: UK

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#24

Post by slug » 19 Jun 2021, 15:51

Hi, Thanks for the reply. Will forge ahead both willy and nilly......

EPOCH3
Member
Posts: 641
Joined: 30 Jul 2006, 23:22
Location: RI USA

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#25

Post by EPOCH3 » 20 Jun 2021, 00:03

please post some pics of your build -

Milan Mynar
Member
Posts: 291
Joined: 21 Jan 2014, 20:26

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#26

Post by Milan Mynar » 20 Jun 2021, 12:50

It is really great work, the highest level.

EPOCH3
Member
Posts: 641
Joined: 30 Jul 2006, 23:22
Location: RI USA

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#27

Post by EPOCH3 » 16 Aug 2021, 19:43

Here are a few pics of the nearly finished 42cm Gamma prototype build up of the kit (from Billie Debekker of Panzer Concepts).
Beautiful model.
Attachments
g (12).jpg
c (23).jpg

User avatar
Eax-E
Member
Posts: 865
Joined: 08 Jun 2010, 18:58

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#28

Post by Eax-E » 28 Aug 2021, 11:47

Amazing job EPOCH3 ! Thanks for sharing !

James A Pratt III
Member
Posts: 896
Joined: 30 Apr 2006, 01:08
Location: Texas

Re: 42cm Marinekanone L/16, Gamma-Gerät 3D printed

#29

Post by James A Pratt III » 13 Oct 2021, 17:20

Very impressive! I am thinking of building a 42cm in 1/72nd scale where can I find or get it?

Post Reply

Return to “Model building”