IAB in silver: who is the maker?

Discussions on Axis awards and decorations. Hosted by John G & William Kramer.
Post Reply
valsente
Member
Posts: 336
Joined: 13 Jan 2003, 01:45
Location: Milano

IAB in silver: who is the maker?

#1

Post by valsente » 11 Sep 2018, 09:06

Hello guys,
I need your help about this unmarked IAB. Who could be the maker?
Thanks in advance
Val

Image
Image

User avatar
von thoma
Member
Posts: 6531
Joined: 10 Jul 2010, 04:40
Location: Spain

Re: IAB in silver: who is the maker?

#2

Post by von thoma » 12 Sep 2018, 22:58

My vote for a Rudolph Souval abzeichen
" The right to believe is the right of those who don't know "


User avatar
rlimike
Member
Posts: 554
Joined: 30 Oct 2007, 03:19
Location: Harrare

Re: IAB in silver: who is the maker?

#3

Post by rlimike » 14 Sep 2018, 00:52

Going out on a limb here…. Looking at Rudolf Souval badges the 3 areas I have posted from the front of your badge are not close to a match for the same areas on a Rudolf Souval badge. The areas I have circled on the reverse look like an F.W. Assmann badge 2 mold marks (one on the rifle butt & one at the barrel / bayonet) and what looks like the number 2 under the pin and the catch that is molded into the badge. It is zinc and in rough condition but I believe it to be Assmann not Souval. JMHO.
Attachments
rev 2-vert.jpg
rev 1-vert.jpg
rev 1-vert.jpg (58.71 KiB) Viewed 1285 times

User avatar
rlimike
Member
Posts: 554
Joined: 30 Oct 2007, 03:19
Location: Harrare

Re: IAB in silver: who is the maker?

#4

Post by rlimike » 14 Sep 2018, 21:30

Here is an example of the Assmann IAB in better condition ... I got the picture from John T's website. https://www.originalgermanmilitaria.com ... n-marked-2

to me the badge that started this thread and this badge are the same except for the very poor condition of the first badge. You can see the number 2 peeking out from behind the pin on both badges.
Regards,
Mike
Attachments
fw assmann mm2.JPG
fw assmann mm2.JPG (96.89 KiB) Viewed 1270 times

valsente
Member
Posts: 336
Joined: 13 Jan 2003, 01:45
Location: Milano

Re: IAB in silver: who is the maker?

#5

Post by valsente » 19 Sep 2018, 08:13

Thanks a lot to you all guys.
Val

Post Reply

Return to “Axis Awards”