Is there a standard plan for the wall mounted table that can fold up against a wall normally used for a machine gun belt loader?
The photo below shows the type I mean and this example is found in 'Bunker 20' on the Westwall.
Best wishes,
Malcolm

Hi Marc,MpM wrote: ↑17 Jan 2023 09:25Hi Malcolm,
Never seen a plan but many years ago we found a broken one.
Sorry no pics or factory drawings but i remembered the top coat was an asbestos plate...
It's called a Gurtfüllertisch, see no.9 on the drawing.
Scaled measurements are aprox. 700mm x 500mm
Best regards,
Marc