I have found a few over at http://www.airwar.ru, unfortunately they're not detailed enough, as they're missing the wing's cross section. Does anyone have any handy?
Thank you in advance.
Looking for detailed drawings of Fokker D-XXI and/or G-1
I think some kind of drawings of Fokker D.XXI has been published in Finland. I just wish I'd remember when and in which magazine or book... It may be that their accuracy is not enought for you.
If I remember correctly I think there have been drawings in SIL Magazine [Suomen ilmailuhistoriallinen lehti] (in Finnish only) and/or perhaps in the self-published book "The Pilot's Point of View, Vol. 2" [Lentäjän näkökulma 2] (in Finnish only) by Jukka Raunio. He also writes to SIL Magazine. These are anyway rather small drawings.
SIL Magazine is edited by Pentti Manninen who is also the leading aviation artist in Finland and he has also drew excellent drawings. I think there was recently also a story on Fokker G.1 in SIL magazine but I don't remember if there were any drawings? Probably you'd need more accurate ones...
This is the post address of Pentti Manninen (I don't know his e-mail). Anyway if you desperately need drawings of Fokker D.XXI I think he is the person who can help you:
Pentti Manninen
InScale 72 production
Jakomäentie 8 b C 300
00770 Helsinki
FINLAND
Another possible place would be of course IPMS Finland but I couldn't find any of their e-mail addresses. Their webpage is at:
http://www.ipmsfinland.org/blog.php
----
The only original drawings of Fokker D.XXI are in Finland because this fighter was produced in Finland by State Aircraft Factory (VL).
Sorry, but I can't help any more.
If I remember correctly I think there have been drawings in SIL Magazine [Suomen ilmailuhistoriallinen lehti] (in Finnish only) and/or perhaps in the self-published book "The Pilot's Point of View, Vol. 2" [Lentäjän näkökulma 2] (in Finnish only) by Jukka Raunio. He also writes to SIL Magazine. These are anyway rather small drawings.
SIL Magazine is edited by Pentti Manninen who is also the leading aviation artist in Finland and he has also drew excellent drawings. I think there was recently also a story on Fokker G.1 in SIL magazine but I don't remember if there were any drawings? Probably you'd need more accurate ones...
This is the post address of Pentti Manninen (I don't know his e-mail). Anyway if you desperately need drawings of Fokker D.XXI I think he is the person who can help you:
Pentti Manninen
InScale 72 production
Jakomäentie 8 b C 300
00770 Helsinki
FINLAND
Another possible place would be of course IPMS Finland but I couldn't find any of their e-mail addresses. Their webpage is at:
http://www.ipmsfinland.org/blog.php
----
The only original drawings of Fokker D.XXI are in Finland because this fighter was produced in Finland by State Aircraft Factory (VL).
Sorry, but I can't help any more.
- Cantankerous
- Member
- Posts: 1277
- Joined: 01 Sep 2019, 22:22
- Location: Newport Coast
Re: Looking for detailed drawings of Fokker D-XXI and/or G-1
The cross section of the wing of the Fokker D.XXI can be seen in this diagram at the following link:cuski wrote: ↑06 Nov 2003, 22:00I have found a few over at http://www.airwar.ru, unfortunately they're not detailed enough, as they're missing the wing's cross section. Does anyone have any handy?
Thank you in advance.
http://www.airwar.ru/image/idop/fww2/fo ... kd21-2.gif
There's a drawing of the Fokker G.I at this link:
https://en.wikipedia.org/wiki/Fokker_G.I